Whether it’s a new build, where the defined fire protection is mandatory for buildings of classes 3 & 4 in accordance with the high-rise directive and must be planned in from the outset, whether it’s a subsequent addition to a building, whether it’s a refurbishment or a so-called upgrading measure to modernise the functionality of a façade: it makes more than sense to rely on the new TEROSON fire protection system – for example in the area of interfaces, for example where the roof covering reaches the façade, because flying sparks are the most common cause of fire at this point. Either way: with the new FO 2 FR sealing foil and the four other TEROSON products for processing, you have the best possible protection solution for every task on the façade – always including fire protection. This gives you maximum security.

The new sealing membrane as a protective shield./h3>

TEROSON FO 1500 FR

Non-combustible, air and water vapour-tight building connection membrane for indoor use/h3>

• ‘Non-combustible’ in accordance with DIN EN 13501 fire protection class A2-s1 d0
• Water vapour-tight with an SD value of > 1500 m
• Water, driving rain and airtight
• Can be processed with TEROSON AD KDS FR film paste and TEROSON PS 112 FR transfer adhesive tape down to -5 °C

New special sealing strip adhesive for more fire protection.

TEROSON AD KDS FR

Effective 1-component adhesive based on MS polymers.

• Flame retardant (complies with DIN EN 13501-1, class C s1, d0)
• Special polymer paste for bonding sealing strips
• Certified as effective fire protection solution in combination with TEROSON FO 2 FR
• Gap-bridging up to 20 mm and UV-resistant
• Can be used down to -5 °C
• Fast-curing adhesive for gun application
• No priming coat required on most common building materials
• Awarded the EMICODE® quality seal and certified according to LEED, BREEAM and DGNB

Universal window installation foam for more fire protection.

TEROSON EF 537

The all-in-one solution for insulation, protection and installation.

• Flame retardant (flammability class B1 in compliance with DIN 4102)
• Acoustic insulation up to 63 dB
• Can be used down to -10 °C
• Post-expansion of max. 20 %
• Very low curing pressure
• EMICODE® EC1 Plus certified

The high-temperature-resistant, double-sided self-adhesive strip for greater fire protection.

TEROSON PS 112 FR

The universal solution for bonding sealing films to non-porous and porous substrates

• Extremely self-adhesive
• Heat and UV-resistant
• Water-resistant and airtight
• Can be used down to -5 °C
• System component of FO 1500 FR (A2-s1, d0 – non-combustible)