FO 150 FOIL-TACK M+S

Super tight as ever,
powerful as never before

Floor-to-ceiling base sealing

The new generation special sealing strip

Further developed for permanent, universal safety at the highest level: robustness, waterproofing, installaion and reliable results – TEROSON FO 150 FOIL-TACK M+S has been consistently setting standards as a special sealing strip with unique performance features for years – and is thus a permanent asset in facade and window construction.

From now on, you will benefit from even higher performance values including full DIN 18533 conformity and an even wider range of applications – now also clompaint with the part W 1.1E & W 1.2E (critical floor connection areas).

Reliable and universal sealing all year round – with the new, comprehensively optimised TEROSON FO 150 FOIL-TACK M+S.

Floor-to-ceiling base sealing

Vertical sealing

Floor sealing connection

Sealing the lintel and window base

Anchor sealing

High-tech adhesive teamed up with TEROSON waterproofing expertise

Hotmelt adhesives are a key competence of Henkel, the worldwide leader in Adhesive Technologies. When combining TEROSON’s high expertise in window and facade sealing with the latest generation of hotmelt adhesives, the outcome can only be an innovative solution with unique application features. Here the advantages of working with hotmelts:

WET ADHESION

Hotmelt technology stands for very high bonding strength even on wet window frames. No need for time- and labor-consuming preparatory work like the removal of moisture.

KEYING EFFECT (MICRO-MECHANICAL ADHESION)

Hotmelt technology ensures powerful adhesion to all mineral building materials. The delayed cross-linking process produces a strong bond with the masonry, resulting in exceptionally high final strength.

EASE OF APPLICATION

Hotmelt technology ensures a sealing strip of low weight that offers quick and comfortable installation. Thanks to the practical TEROSON finger lift, the strip can be quickly pulled off the protective film – even with gloves.

TIME SAVINGS

Hotmelt technology allows much faster progress on site – even at temperatures down to -5 °C. As a result, the sealing strip can be used all year round, thus helping to prevent weather-related downtimes and construction delays.

SAVES NATURAL RESOURCES

Hotmelt technology also offers advantages in terms of „ecological building“: Thanks to its outstanding adhesive properties, it is 50 % more resource-efficient than conventional bituminous sealing products.

TEROSON FO 150 FOIL-TACK M+S

A totally convincing performance – in every respect

The new TEROSON FO 150 FOIL-TACK M+S is the product of choice for the effective, trouble-free and permanently tight sealing of facades on the warm side of buildings. Compared to the previous generation, the new FO 150 has been significantly improved, now offering more robustness and higher bonding strength. Advanced hotmelt technology and the total absence of bitumen ensure that the sealing strip is lighter and thinner – and thus more flexible and easier to handle.
  • Meets the requirements DIN 18533
  • Immediately watertight, water-impermeable as well as diffusion- and airtight
  • Optimized adhesion to wet window frames, comfortable time window for repositioning the strip
  • Asymmetrically divided PE carrier film instead of release paper – no tearing, no fiddling around with the paper
  • Self-adhesive over the entire strip surface, instant adhesion without need for additional mechanical fastening overhead
  • Very high initial tack, extremely powerful direct bonding of “strip on strip”
  • Finger lift on 3 sides of the strip to ensure quick and comfortable handling
  • Highly tearproof and easily moldable to the surface – ideally suited for sealing base areas
  • Easy, effortless installation thanks to significantly reduced area weight
  • Bitumen-free and bitumen-resistant

Technical advantages

*compared to the previous product generation

Products in the TEROSON system:
Reliable, long-term protection

TEROSON FO 150 FOIL-TACK M+S

Full-surface self-adhesive special sealing strip, water-, air- and diffusion-tight, equipped with hotmelt technology
  • Diffusion-tight
  • Thin, light-weight but highly robust
  • Very fast and user-friendly installation
  • Can be repositioned
  • Powerful adhesion even on wet window frames
  • Bitumen-free and bitumen-resistant
  • Can be used all year round (down to -5 °C)
  • Meets the requirements DIN 18533 for floor connection areas
FO 150 FOIL-TACK M+S width scheme

NOW EVEN EASIER TO INSTALL:

TEROSON FO 150 FOIL-TACK M+S is now equipped with an additional cut in the release film (all versions from 300 mm upwards). This makes installation much easier in the corner areas and when working without a second pair of hands. Work is now even safer, easier and faster.

Downloads

Product variants
TEROSON FO 150 FOIL-TACK M+S

FOLDER
TEROSON FO 150 FOIL-TACK M+S

Product recommendations

TEROSON AD KDS


More Informationen

TEROSON AD ADHESIVE SPRAY


More Informationen

TEROSON PR PRIMER M+S / TEROSON PR PRIMER SPRAY M+S


More Informationen

TEROSON PR PRIMER ECO


More Informationen